Micro 6-0-0™

///Micro 6-0-0™
Micro 6-0-0™ 2018-03-27T14:20:24+00:00
Micro 6-0-0™ - 1 gal

Micro 6-0-0™ is one of three components that create the complete Cutting Edge Solutions® 3-Part Base family. Micro 6-0-0™ is the foundation for the 3-Part formula and is used at the same rate through the entire life cycle of your plants. Micro 6-0-0™ contains all of the micronutrients needed for peak health, along with the nitrogen and calcium foundation for the 3-Part Base formula.

FIND AT A STORE NEAR YOU

FULL STRENGTH
For Drain to Waste / Soil Applications: check brochure / website mixing ratios
Micro 6-0-0™ Bloom 0-6-5™ Grow 2-1-6™
Clones & Seedlings (after roots) 5 ml/gal 5 ml/gal 10 ml/gal
Vegetative Stages (1 – 2 weeks) 8 ml/gal 5 ml/gal 15 – 20 ml/gal

Early Flowering
Transition Stage (1 – 2 weeks) 8 ml/gal 15 ml/gal 5 ml/gal

Full Bloom
Fruiting Stage (4 – 8 weeks) 8 ml/gal 15 – 20 ml/gal none
Flush Stage (5 – 10 days) 2.5 ml/gal 5 ml/gal none

Teaspoon Tablespoon Fluid Ounce Quart US Gallon
5 ml 15 ml 30 ml 946 ml 3.785 liters

Micro 6-0-0™ is a highly concentrated nutrient solution. Never mix undiluted concentrates as this may result in nutrient lock-up. Add other nutrients separately to water and aerate reservoir regularly. Do not add additional Micro 6-0-0™ to a prepared reservoir.

Shake well and measure carefully using a milliliter measuring cup. Mix Micro 6-0-0™ first into fresh water, stir well, then add other nutrients.

After nutrients are mixed in water, adjust pH to 4.5-6.5.

Monitor ppm and EC in reservoir and top off with fresh water as needed. Empty and refill tanks every 1-2 weeks.

Reservoir water temperature should be 60-68 degrees F.

Do not store product in direct sunlight. Do not freeze.

Micro 6-0-0™ is designed for use in hydroponics, soilless, continuous feed systems, drain to waste, and soil applications.

Total Nitrogen (N) 6.0%

0.3% Ammoniacal Nitrogen

5.7% Nitrate Nitrogen

Calcium (Ca) 5.0%

Boron (B) 0.02%

Iron (Fe) 0.1%

Manganese (Mn) 0.05%

Molybdenum (Mo) 0.0008%

Derived from: Sodium Molybdate, Calcium Nitrate, Zinc Nitrate, Boric Acid, Calcium Carbonate, Manganese, EDTA, Iron EDDHA, and Iron DPTA.

Information regarding the contents and levels of metals in this product is available at: http://www.aapfco.org/metals.html

Specsheet
Safety Data Sheet